Pink Partition 11
50mm - R1.2 450 (17.28m2/pk)
$85.25
Sale price
$85.25
Regular price
Skip to product information
Pink Partition 11
$85.25
Sale price
$85.25
Regular price
GST inclusive
Opening Offer: 5% off orders over $1,000, 7% over $2,500, 10% over $4,000. Ends 30 November. Offer details
How many do you need?
Measure the wall, ceiling or roof area and take about 10% off for studs, joists and purlins.
You need
Which covers
Total
Dispatch: Most orders are processed the same day. Metro delivery: Usually 1–3 business days. We do our best to get most items out on the next business day.
Delivery to VIC and NSW: $55 in metro Melbourne and metro Sydney, $99 in the outer ring around both cities, $149 anywhere else in the two states · Local pickup from Epping, VIC by arrangement · Shipping details
Pink Partition 11 is Fletcher Insulation's 11 kg/m³ glasswool batt, made to friction fit inside the stud cavity of metal framed commercial partitions. Made from up to 80% recycled glass.
The density is the specification
Partition batts are specified by density, not just by R-value, because the density is what the tested wall system references. Pink Partition comes in five: 11, 14, 22, 24 and 32 kg/m³. If a system report names a density, order that one. Substituting a different density into a tested system means the report no longer describes what you built.
Sizes
Five thicknesses, all 1200 mm long. The 50 mm R1.2, 75 mm R1.8, 90 mm R2.1 and 110 mm R2.5 come 450 or 600 mm wide. The 165 mm R3.5 is stocked 600 mm wide, 10 batts and 7.20 m² per pack. Fletcher say to install without compression to keep the R-value, so it needs a cavity that takes the full 165 mm. Pack coverage runs from 7.20 m² to 23.04 m², so check the square metre figure rather than the batt count.
Where it goes
Partition walls in multi residential towers, offices and commercial fit-outs. Non-combustible to AS 1530.1 and rated BAL Low through to Flame Zone in walls, floors and ceilings.
On site
Fitted before the sheeting, it generally stays put without fixings. Insert it into the open side of the channel with no gaps at studs, noggings or joints, and do not force it in.
Full figures are in the table below.
Technical data
Fletcher technical data sheet (PDF)Sizes stocked
| R-value | Thickness | Size (W x L) | Pieces per pack | Coverage per pack | Product code (old / new) |
|---|---|---|---|---|---|
| R1.2 | 50 mm | 450 x 1200 mm | 32 | 17.28 m² | 903442 / 4006003 |
| R1.2 | 50 mm | 600 x 1200 mm | 32 | 23.04 m² | 903444 / 4006005 |
| R1.8 | 75 mm | 450 x 1200 mm | 16 | 8.64 m² | 903446 / 4006007 |
| R1.8 | 75 mm | 600 x 1200 mm | 16 | 11.52 m² | 903448 / 4006009 |
| R2.1 | 90 mm | 450 x 1200 mm | 16 | 8.64 m² | 903450 / 4006011 |
| R2.1 | 90 mm | 600 x 1200 mm | 16 | 11.52 m² | 903452 / 4006013 |
| R2.5 | 110 mm | 450 x 1200 mm | 16 | 8.64 m² | 903458 / 4006017 |
| R2.5 | 110 mm | 600 x 1200 mm | 16 | 11.52 m² | 903454 / 4006015 |
| R3.5 | 165 mm | 600 x 1200 mm | 10 | 7.20 m² | 903463 / 4008199 |
Thermal
| Nominal density | 11 kg/m³ |
|---|---|
| R-value range | R1.2 to R3.5 m²K/W depending on thickness |
| Thermal rating method | AS/NZS 4859.1 |
Fire
| Combustibility | Non-combustible (AS 1530.1) |
|---|---|
| Ignitability index | 0 |
| Spread of flame index | 0 |
| Heat evolved index | 0 |
| Smoke developed index | 1 |
| Bushfire areas | BAL Low through to Flame Zone (AS 3959) |
Early fire hazard indices tested to AS/NZS 1530.3.
Acoustic
| Role in the system | Absorbs sound inside the stud cavity of metal framed partitions |
|---|---|
| Typical uses | Partition walls in multi residential towers, offices and commercial fit-outs |
Thickness and density cover the acceptable forms of construction for sound insulation in the NCC. The Rw you achieve comes from the complete wall system.
Material and handling
| Composition | Glasswool made from up to 80% recycled glass |
|---|---|
| Moisture absorption | Under 0.2% by volume after four days at 50 °C and 95% relative humidity |
| Fungi resistance | Pass, no growth (ASTM C1338-14) |
| Widths | Sized to suit standard steel stud spacings |
Compliance
| Thermal rating | Complies with AS/NZS 4859.1 |
|---|---|
| NCC 2022 | AS/NZS 4859.1 per Volume 1 J4D3(1) and Volume 2 Housing Provisions 13.2.2(1) |
| NCC 2019 sound insulation | Thickness and density cover Volume 1 Specification F5.2 and Volume 2 clause 3.8.6.1 |
| Certification | CodeMark Certificate of Conformity CM 30006 |
| Bushfire | Meets AS 3959 BAL Low to Flame Zone in walls, floors and ceilings |
Compliance applies when the product is correctly specified and installed.
Fitting notes
Made to friction fit between steel studs. Insert it into the open side of the channel so it fits snugly, with no gaps between the batt and the studs or noggings, and butt the edges closely so there are no gaps at joints. Do not stuff or force it into the wall or let it protrude past the studs. Fill small spaces with a single offcut rather than several small pieces. Install it without compression to keep its claimed R-value. It generally stays in place when fitted before the wall sheeting goes on. If it will be left unsupported for a long time, hold it with stringing such as PVC tape. Keep it dry before, during and after installation.
Figures are taken from the Fletcher Insulation technical data sheet for Pink Partition, Revision 7, issued 18 March 2025. The full manufacturer document is linked above. Fletcher can change specifications without notice, so check the current sheet before specifying on a job.
Common questions
What sizes are stocked and how much does each one cover?
9 options are stocked, running from R1.2 to R3.5. The table above lists each one with the coverage or quantity you get.
What thermal performance does it have?
R-value range: R1.2 to R3.5 m²K/W depending on thickness. Thermal rating method: AS/NZS 4859.1. Thermal rating: Complies with AS/NZS 4859.1.
How does it perform in a fire?
Combustibility: Non-combustible (AS 1530.1). Ignitability index: 0. Spread of flame index: 0. Heat evolved index: 0. Smoke developed index: 1.
Can it be used in a bushfire area?
Bushfire areas: BAL Low through to Flame Zone (AS 3959). Bushfire: Meets AS 3959 BAL Low to Flame Zone in walls, floors and ceilings.
What acoustic performance can I expect?
NCC 2019 sound insulation: Thickness and density cover Volume 1 Specification F5.2 and Volume 2 clause 3.8.6.1.
How does it handle moisture?
Moisture absorption: Under 0.2% by volume after four days at 50 °C and 95% relative humidity. Fungi resistance: Pass, no growth (ASTM C1338-14).
Does it meet Australian standards?
NCC 2022: AS/NZS 4859.1 per Volume 1 J4D3(1) and Volume 2 Housing Provisions 13.2.2(1). Certification: CodeMark Certificate of Conformity CM 30006.
What is it made of?
Composition: Glasswool made from up to 80% recycled glass.
How is it installed?
Made to friction fit between steel studs. Insert it into the open side of the channel so it fits snugly, with no gaps between the batt and the studs or noggings, and butt the edges closely so there are no gaps at joints. Do not stuff or force it into the wall or let it protrude past the studs. Fill small spaces with a single offcut rather than several small pieces. Install it without compression to keep its claimed R-value. It generally stays in place when fitted before the wall sheeting goes on. If it will be left unsupported for a long time, hold it with stringing such as PVC tape. Keep it dry before, during and after installation.
Cannot see your question? Ask our team and we will get you an answer.
Figures are taken from the Fletcher Insulation technical data sheet for Pink Partition, Revision 7, issued 18 March 2025. The full manufacturer document is linked above. Fletcher can change specifications without notice, so check the current sheet before specifying on a job.
