THOR Double Sided Scrim Tape for Foil Sarking Joins
24 mm x 25 m
$11.00
Sale price
$11.00
Regular price
Skip to product information
THOR Double Sided Scrim Tape for Foil Sarking Joins
$11.00
Sale price
$11.00
Regular price
GST inclusive
Opening Offer: 5% off orders over $1,000, 7% over $2,500, 10% over $4,000. Ends 30 November. Offer details
Dispatch: Most orders are processed the same day. Metro delivery: Usually 1–3 business days. We do our best to get most items out on the next business day.
Delivery to VIC and NSW: $55 in metro Melbourne and metro Sydney, $99 in the outer ring around both cities, $149 anywhere else in the two states · Local pickup from Epping, VIC by arrangement · Shipping details
THOR Double Sided Scrim Tape is a polyethylene scrim tape with adhesive on both faces, used to join the overlapped edges of foil faced reflective sheeting. THOR says it gives moisture and dust-proof joins under roofs and inside gables. We sell the 24 mm wide roll, 25 m long.
Material and handling
The carrier is a fine, high density polyethylene non-woven reinforced scrim that is very flexible. Both sides are coated with a heavy layer of aggressive adhesive. Each roll is wound with a release liner, which protects the adhesive and makes the tape easier to handle and apply. It tears by hand.
Where it is used
The main job is the lap between two runs of foil sarking, where THOR says it assists in joining the overlapped edges. THOR's earlier product pages list a second use: holding roof sarking in place on steel purlins during construction. Off the roof, THOR also lists it for laying carpet, linoleum and carpet tiles. Our article on choosing wall wrap and sarking covers the membranes themselves.
Rolls and ordering
Sold by the single roll, product code DS-24. Full details are in the table below.
Technical data
Sizes stocked
| Roll size | Sold by | Product code |
|---|---|---|
| 24 mm x 25 m | Single roll | DS-24 |
Uses
| Main use | Joining the overlapped edges of foil faced reflective sheeting (sarking) |
|---|---|
| Joins | Moisture and dust-proof, under roofs and inside gables |
| During construction | Holding roof sarking in place on steel purlins |
| Other uses | Laying carpet, linoleum and carpet tiles |
The steel purlin use comes from THOR's 2013 and 2016 product pages, the others from the current page.
Material and handling
| Carrier | Fine, high density polyethylene non-woven reinforced scrim, very flexible |
|---|---|
| Adhesive | Heavy layer of aggressive adhesive on both sides |
| Release liner | Each roll is wound with a release liner |
| Cutting | Easy to tear by hand |
The liner protects the adhesive until the tape is applied.
Fitting notes
Each roll is wound with a release liner, which protects the adhesive and makes the tape easier to handle and apply. The tape tears by hand. THOR lists it for joining the overlapped edges of foil faced reflective sheeting, and its earlier product pages also list holding roof sarking in place on steel purlins during construction.
Figures are taken from THOR Building Products' product page for Double Sided Scrim Tape (DS-24) at thorbuilding.com.au, read on 13 October 2026, with the steel purlin use from THOR's earlier pages for the same tape (2013 and 2016). Sizes and product codes are from the Rhino product list. THOR can change specifications without notice, so check with THOR before specifying on a job.
Common questions
What is Double Sided Scrim Tape used for?
Its main use is joining the overlapped edges of foil faced reflective sheeting, which is foil sarking. THOR says it gives moisture and dust-proof joins under roofs and inside gables.
Can it hold sarking on steel purlins?
Yes. THOR's 2013 and 2016 product pages list holding roof sarking in place on steel purlins during construction as a use for this tape.
What sizes do you sell?
One size, 24 mm wide and 25 m long (DS-24), sold by the single roll.
What is it made of?
A fine, high density polyethylene non-woven reinforced scrim that is very flexible, with a heavy layer of aggressive adhesive on both sides.
Can it be torn by hand?
Yes. THOR says it is easy to tear by hand. Each roll is wound with a release liner that protects the adhesive and makes the tape easier to handle and apply.
Can it be used for laying carpet?
THOR says it is also useful for laying carpet, linoleum and carpet tiles.
Cannot see your question? Ask our team and we will get you an answer.
Answers use THOR Building Products' product page for Double Sided Scrim Tape (DS-24), read 13 October 2026, and THOR's 2013 and 2016 product pages for the steel purlin use. Sizes and product codes are from the Rhino product list.
