Stinger A-11 Staples 3/8" Master Carton
Master carton, 20 boxes of 5000
$159.00
Sale price
$159.00
Regular price
Skip to product information
Stinger A-11 Staples 3/8" Master Carton
$159.00
Sale price
$159.00
Regular price
GST inclusive
Dispatch: Most orders are processed the same day. Metro delivery: Usually 1–3 business days. We do our best to get most items out on the next business day.
Australia-wide freight · Local pickup from Epping, VIC by arrangement. Ordering from the outback? Get in touch about deliveries to remote locations · Shipping details
Stinger A-11 galvanised chisel point staples for hammer tackers. 3/8 inch (9.5 mm) crown, 3/8 inch leg, 20 gauge. 5000 staples per box, 20 boxes to a master carton, which is 100,000 staples.
Why the carton
RM Industries supply these by the master carton only, so that is how we list them. If you want a single box, ask us and we will quote it.
Galvanised, and that matters
A plain steel staple in a wall wrap rusts, and the rust stain runs down the membrane and eventually eats the leg. Galvanised is the minimum for anything that sits in a wall cavity. The chisel point drives cleanly rather than crushing the timber fibre.
Fit
They suit the Stinger HT38 hammer tacker and the same pattern as Rapid A-11 and Arrow T-50 tools. They meet ASTM F1667.
How far a carton goes
At roughly 150 mm centres on studs, one 5000 staple box covers a lot of wall. A master carton is a crew supply for a season rather than a single house.
Note: the Stinger data sheet gives the crown and leg as 3/8 inch, 20 gauge. RM Industries list the same item as 10 mm crown, 21 gauge. It is the same staple, described in different units.
Technical data
Stinger product data sheet (PDF)Sizes stocked
| Item | Pack | Barcode | Master carton | Product code |
|---|---|---|---|---|
| A-11 staples 3/8 inch | 5000 per box | 042928103562 | 20 boxes | 940042 |
Staple
| Crown | 3/8 inch (9.5 mm) |
|---|---|
| Leg length | 3/8 inch (9.5 mm) |
| Gauge | 20 gauge |
| Point | Chisel point |
| Finish | Galvanised |
| Standard | Meets ASTM F1667 |
RM Industries describe the same staple as 10 mm crown, 21 gauge. The Stinger figures above are from the manufacturer sheet.
Compatibility
| Stinger tools | HT38 Hammer Tacker |
|---|---|
| Similar patterns | Rapid A-11, Arrow T-50 |
Supply
| Box | 5000 staples |
|---|---|
| Master carton | 20 boxes, 100,000 staples |
| Supply condition | RM Industries supply by master carton only |
Fitting notes
Load a full strip so the magazine feeds cleanly. Staple through the framing member, not through open membrane. Keep the boxes dry, because damp cardboard lets the collating glue soften and the strips break up in the magazine.
Figures are taken from the Stinger A-11 staple details on the HT38 product data sheet supplied by RM Industries. The document is linked above.
Common questions
Can I buy a single box?
Not through the website. RM Industries supply these by the master carton only, which is 20 boxes. Contact us and we will quote a single box separately.
How many staples is that?
100,000. 5000 per box, 20 boxes per carton.
What tools do they fit?
The Stinger HT38 hammer tacker, and tools taking the A-11 pattern such as Rapid A-11 and Arrow T-50.
Are they galvanised?
Yes. In a wall cavity that matters, because a plain steel staple rusts and stains the membrane.
Why do the crown sizes differ between the two sheets?
They do not. The Stinger sheet gives 3/8 inch, which is 9.525 mm, and RM round it to 10 mm. The gauge is listed as 20 by Stinger and 21 by RM, which is the same wire described from different references.
Cannot see your question? Ask our team and we will get you an answer.
Answers use the Stinger HT38 and A-11 staple product data sheet supplied by RM Industries.
