R2.0 Pink Wall Batts Insulation

1/4

$53.91

$53.91 $56.75

GST inclusive

Dispatch: Most orders are processed the same day. Metro delivery: Usually 1–3 business days. We do our best to get most items out on the next business day.

Australia-wide freight · Local pickup from Epping, VIC by arrangement. Ordering from the outback? Get in touch about deliveries to remote locations · Shipping details

R2.0 Pink Wall Batts are 90 mm FBS-1 bio-soluble glasswool batts from Fletcher, sized for a standard residential stud wall.

Big packs, which matters on a house lot

24 batts to a pack in both widths at 1160 mm long. The 430 mm covers 11.97 m² per pack and the 580 mm covers 16.15 m². Those are among the largest wall pack coverages we stock, so a whole house takes fewer packs and fewer trips than most alternatives at the same R-value.

Fire and bushfire

Non-combustible to AS 1530.1 and rated BAL Low through to Flame Zone under AS 3959. It meets NCC 2022 clause C2D10(1) for non-combustibility and the thermal rating complies with AS/NZS 4859.1 per Volume 1 J4D3(1) and Housing Provisions 3.12.2(1).

If you need more from the same wall

A 90 mm stud sets the depth, so the only way up is a denser batt. R2.5HD Pink reaches R2.5 in the same 90 mm cavity.

On site

Friction fits between standard wall studs and holds without fixings. Let the batts recover to full thickness before installing, and do not compress them into a narrower bay. The batt should touch the frame on all four sides.

Full figures are in the table below.

Technical data

Fletcher technical data sheet (PDF)

Fletcher Insulation · Glasswool · Wall application

Sizes stocked

Size (L x W x thickness)	Batts per pack	Pack size	Product code (old / new)
1160 x 430 x 90 mm	24	11.97 m²	901217 / 4006093
1160 x 580 x 90 mm	24	16.15 m²	901218 / 4006094

Thermal

Material R-value	R2.0 m²K/W
Nominal thickness	90 mm
Maximum service temperature	340 °C (ASTM C411/C447)

Fire

Combustibility	Non-combustible (AS1530.1)
Ignitability index	0
Spread of flame index	0
Heat evolved index	0
Smoke developed index	0 to 1
Bushfire areas	BAL Low through to Flame Zone (AS3959)

Early fire hazard indices tested to AS/NZS 1530.3.

Material and handling

Composition	FBS-1 bio-soluble glasswool
Moisture absorption	Under 0.2% by volume
Fungi resistance	Pass, no growth (ASTM C1338-14)
Recycled content	Australian made using up to 80% recycled content
Certification	CodeMark certified

Compliance

Thermal rating	Complies with AS/NZS 4859.1
NCC 2022	AS/NZS 4859.1 per Volume 1 J4D3(1) and ABCB Housing Provisions 3.12.2(1)
NCC 2022 non-combustibility	Non-combustible per AS/NZS 1530.1, meets clause C2D10(1)

Compliance applies when the product is correctly specified and installed.

Fitting notes

Friction fits between standard wall studs, so it holds without fixings. Let the batts recover to full thickness before installing and do not compress them into the cavity, because a squashed batt delivers less than its rated R-value. Keep the product dry at all times.

Figures are taken from the Fletcher Insulation technical data sheet for Pink Batts Wall, Revision 12, issued 1 February 2025. The full manufacturer document is linked above. Fletcher can change specifications without notice, so check the current sheet before specifying on a job.

Common questions

What sizes are stocked and how much does each one cover?

2 options are stocked, running from 1160 x 430 x 90 mm to 1160 x 580 x 90 mm. The table above lists each one with the coverage or quantity you get.

What thermal performance does it have?

Material R-value: R2.0 m²K/W. Maximum service temperature: 340 °C (ASTM C411/C447). Thermal rating: Complies with AS/NZS 4859.1.

How does it perform in a fire?

Combustibility: Non-combustible (AS1530.1). Ignitability index: 0. Spread of flame index: 0. Heat evolved index: 0. Smoke developed index: 0 to 1. NCC 2022 non-combustibility: Non-combustible per AS/NZS 1530.1, meets clause C2D10(1).