{"product_id":"thor-thermal-break-tape","title":"THOR Thermal Break Tape 10mm Foam","description":"\u003cp\u003eTHOR Thermal Break Tape is a 10 mm thick black polyethylene foam tape, self adhesive on one side. It goes on the outside face of the steel frame, between the frame and the external cladding, to keep the two apart in steel frame homes.\u003c\/p\u003e\n\u003ch3\u003eNo current R-value\u003c\/h3\u003e\n\u003cp\u003eTHOR's 2011 data sheet quoted an R-value for this tape without citing a test report, and it was written against an older edition of the building code. THOR publishes no current figure, so we do not quote one. Where a job needs a declared R-value at the frame, use \u003ca href=\"\/products\/ametalin-thermalbreak-strips-r025\"\u003eAmetalin ThermalBreak Strips\u003c\/a\u003e, tested at R0.25, and confirm the requirement with your certifier. Our article on \u003ca href=\"\/blogs\/blog\/thermal-break-r02-explained\"\u003ethe R0.2 thermal break\u003c\/a\u003e explains where one is needed.\u003c\/p\u003e\n\u003ch3\u003eFire\u003c\/h3\u003e\n\u003cp\u003eThe foam is polyethylene, which is combustible, and THOR publishes no fire test results for the tape. Where the wall has to be non-combustible, use the \u003ca href=\"\/products\/ametalin-non-combustible-thermalbreak-strip\"\u003eAmetalin Non-combustible ThermalBreak Strip\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch3\u003eRolls\u003c\/h3\u003e\n\u003cp\u003eEach roll is 30 mm wide and 10 m long. We sell single rolls, and THOR packs them 12 to a box. Store the rolls in their box, out of direct sun, until they go on. Full details are in the table below.\u003c\/p\u003e","brand":"THOR","offers":[{"title":"30 mm x 10 m roll","offer_id":67636077691062,"sku":"TB-30","price":15.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/thor-thermal-break-tape-roll.jpg?v=1791904018","url":"https:\/\/awbm.com.au\/products\/thor-thermal-break-tape","provider":"AWBM","version":"1.0","type":"link"}