{"title":"Metecno","description":"\u003cp\u003eMetecno make MetecnoTherm, the CodeMark certified rigid PIR insulation board used in walls, ceilings and underfloor. Ten thicknesses from 25 to 100 mm, declared R1.05 to R4.30. Supplied by AWBM across Victoria and New South Wales.\u003c\/p\u003e","products":[{"product_id":"metecnotherm-r1-05-pir-insulation-board-25mm","title":"MetecnoTherm R1.05 PIR Insulation Board 25 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R1.05 is a 25 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 25 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R1.05 at 23 degrees, or R1.10 at 15 degrees. In a wall the certified total rises to R1.29 at 15 degrees, and in a ceiling to R1.28. This is the thinnest board in the range, used where the cavity is almost full and you are chasing the last bit of R-value, and as a thermal break layer over framing.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R1.05 with a glasswool batt you would be looking at about 55 mm of depth instead of 25 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 44 boards, 126.72 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"25 x 1200 x 2400 mm","offer_id":45386136748214,"sku":"PIR-MTG2-25","price":90.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1.jpg?v=1787855159"},{"product_id":"metecnotherm-r1-25-pir-insulation-board-30mm","title":"MetecnoTherm R1.25 PIR Insulation Board 30 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R1.25 is a 30 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 30 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R1.25 at 23 degrees, or R1.35 at 15 degrees. In a wall the certified total rises to R1.51 at 15 degrees, and in a ceiling to R1.50. This is a common under slab and soffit thickness where the depth available is tight.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R1.25 with a glasswool batt you would be looking at about 65 mm of depth instead of 30 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 37 boards, 106.56 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"30 x 1200 x 2400 mm","offer_id":45386136780982,"sku":"PIR-MTG2-30","price":99.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1_553b6091-1885-44ca-9cbd-52c0619a984d.jpg?v=1787855160"},{"product_id":"metecnotherm-r1-70-pir-insulation-board-40mm","title":"MetecnoTherm R1.70 PIR Insulation Board 40 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R1.70 is a 40 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 40 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R1.70 at 23 degrees, or R1.80 at 15 degrees. In a wall the certified total rises to R1.96 at 15 degrees, and in a ceiling to R1.95. This is the point where a board starts to compete with a thin batt on R-value while taking half the space.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R1.70 with a glasswool batt you would be looking at about 85 mm of depth instead of 40 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 27 boards, 77.76 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"40 x 1200 x 2400 mm","offer_id":45386136846518,"sku":"PIR-MTG2-40","price":101.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1_18a07e5b-20ff-4e53-8156-82dca70c6b59.jpg?v=1787855161"},{"product_id":"metecnotherm-r2-15-pir-insulation-board-50mm","title":"MetecnoTherm R2.15 PIR Insulation Board 50 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R2.15 is a 50 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 50 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R2.15 at 23 degrees, or R2.25 at 15 degrees. In a wall the certified total rises to R2.41 at 15 degrees, and in a ceiling to R2.40. This is the general purpose thickness, and the one most often held in stock, because it clears R2 in 50 mm of depth.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R2.15 with a glasswool batt you would be looking at about 110 mm of depth instead of 50 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 22 boards, 63.36 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"50 x 1200 x 2400 mm","offer_id":45386138190006,"sku":"PIR-MTG2-50","price":107.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1_2cde8ed9-bd86-44d6-b4f8-bef1ed420033.jpg?v=1787855302"},{"product_id":"metecnotherm-r2-55-pir-insulation-board-60mm","title":"MetecnoTherm R2.55 PIR Insulation Board 60 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R2.55 is a 60 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 60 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R2.55 at 23 degrees, or R2.70 at 15 degrees. In a wall the certified total rises to R2.86 at 15 degrees, and in a ceiling to R2.85. This is a step up for a wall that has to reach R2.5 without a deeper stud.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R2.55 with a glasswool batt you would be looking at about 130 mm of depth instead of 60 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 18 boards, 51.84 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"60 x 1200 x 2400 mm","offer_id":45386138222774,"sku":"PIR-MTG2-60","price":121.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1_f402cf8d-867b-4089-ac18-6a7f3f19c3e9.jpg?v=1787855303"},{"product_id":"metecnotherm-r3-00-pir-insulation-board-70mm","title":"MetecnoTherm R3.00 PIR Insulation Board 70 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R3.00 is a 70 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 70 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R3.00 at 23 degrees, or R3.15 at 15 degrees. In a wall the certified total rises to R3.31 at 15 degrees, and in a ceiling to R3.30. This is a ceiling and soffit thickness where R3 is the target.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R3.00 with a glasswool batt you would be looking at about 150 mm of depth instead of 70 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 16 boards, 46.08 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"70 x 1200 x 2400 mm","offer_id":45386138255542,"sku":"PIR-MTG2-70","price":131.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1_5902913e-dbb4-49c6-b9f3-ad3c146d8c78.jpg?v=1787855304"},{"product_id":"metecnotherm-r3-20-pir-insulation-board-75mm","title":"MetecnoTherm R3.20 PIR Insulation Board 75 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R3.20 is a 75 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 75 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R3.20 at 23 degrees, or R3.35 at 15 degrees. In a wall the certified total rises to R3.54 at 15 degrees, and in a ceiling to R3.53. This is a common commercial soffit thickness, R3.2 in 75 mm.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R3.20 with a glasswool batt you would be looking at about 165 mm of depth instead of 75 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 15 boards, 43.2 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"75 x 1200 x 2400 mm","offer_id":45386138288310,"sku":"PIR-MTG2-75","price":139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1_920a96a1-b7bc-4d9a-a41a-3f147f17d6ad.jpg?v=1787855304"},{"product_id":"metecnotherm-r3-40-pir-insulation-board-80mm","title":"MetecnoTherm R3.40 PIR Insulation Board 80 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R3.40 is an 80 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 80 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R3.40 at 23 degrees, or R3.60 at 15 degrees. In a wall the certified total rises to R3.76 at 15 degrees, and in a ceiling to R3.75. This is used where R3.4 is specified and the cavity allows 80 mm.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R3.40 with a glasswool batt you would be looking at about 175 mm of depth instead of 80 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 14 boards, 40.32 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"80 x 1200 x 2400 mm","offer_id":45386138878134,"sku":"PIR-MTG2-80","price":145.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1_eae03208-ab06-440d-a89c-fba65c70910e.jpg?v=1787855408"},{"product_id":"metecnotherm-r3-85-pir-insulation-board-90mm","title":"MetecnoTherm R3.85 PIR Insulation Board 90 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R3.85 is a 90 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 90 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R3.85 at 23 degrees, or R4.05 at 15 degrees. In a wall the certified total rises to R4.21 at 15 degrees, and in a ceiling to R4.20. This is a heavy thickness for cold climate walls and roofs, R3.85 in 90 mm.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R3.85 with a glasswool batt you would be looking at about 195 mm of depth instead of 90 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 12 boards, 34.56 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"90 x 1200 x 2400 mm","offer_id":45386138910902,"sku":"PIR-MTG2-90","price":162.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1_704cb428-8701-4997-93af-5a0cc8632cfa.jpg?v=1787855408"},{"product_id":"metecnotherm-r4-30-pir-insulation-board-100mm","title":"MetecnoTherm R4.30 PIR Insulation Board 100 x 1200 x 2400mm","description":"\u003cp\u003eMetecnoTherm R4.30 is a 100 mm rigid polyisocyanurate board with a flexible foil facing on both sides, made by Metecno in Australia. Board size 2400 x 1200 mm, 2.88 m² per board. Priced per board.\u003c\/p\u003e\n\u003ch3\u003eWhat 100 mm buys you\u003c\/h3\u003e\n\u003cp\u003eDeclared R4.30 at 23 degrees, or R4.50 at 15 degrees. In a wall the certified total rises to R4.66 at 15 degrees, and in a ceiling to R4.65. This is the thickest stocked board, R4.3, for the jobs where a batt would need more than 200 mm to match it.\u003c\/p\u003e\n\u003ch3\u003eAgainst a batt\u003c\/h3\u003e\n\u003cp\u003eThermal conductivity is 0.024 W\/m·K, roughly half that of glasswool. To reach R4.30 with a glasswool batt you would be looking at about 220 mm of depth instead of 100 mm. That is the whole reason a rigid board gets specified: the cavity depth is fixed and the batt cannot get there.\u003c\/p\u003e\n\u003ch3\u003eFire, stated plainly\u003c\/h3\u003e\n\u003cp\u003eGroup Number 2 with the embossed foil face, tested to AS ISO 9705 and assessed to AS 5637.1:2015. The CodeMark certificate also states it has not been tested to AS 1530.1 and cannot be treated as non-combustible. If the job needs non-combustible material, this is not the board for it. As an internal wall or ceiling lining the Group Number has to satisfy Table S7C4 of Specification 7, NCC Volume One.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eSold per board. A full pallet is 11 boards, 31.68 m². Metecno make the range in 5 mm increments and in white, black, plasterboard and fibre cement faced versions, all to order. \u003ca href=\"\/pages\/contact\"\u003eAsk us\u003c\/a\u003e for anything not listed, or for pallet freight on a large order.\u003c\/p\u003e\n\u003ch3\u003eOther thicknesses\u003c\/h3\u003e\n\u003cp\u003eSee the full \u003ca href=\"\/collections\/rigid-boards\"\u003erigid board range\u003c\/a\u003e for the other nine MetecnoTherm thicknesses from 25 mm to 100 mm.\u003c\/p\u003e","brand":"Metecno","offers":[{"title":"100 x 1200 x 2400 mm","offer_id":45386138943670,"sku":"PIR-MTG2-100","price":170.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/files\/MetecnoTherm-Gallery-1_92430c9c-ee89-4d2f-bcd3-31d1109e9cb4.jpg?v=1787855409"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0732\/3995\/3590\/collections\/brand-metecno.png?v=1787856355","url":"https:\/\/awbm.com.au\/collections\/metecno.oembed","provider":"AWBM","version":"1.0","type":"link"}